Cisco WAP361 Wireless-AC/N Dual Radio Wall Plate Access Point with PoE (Russia)

Standards : IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af/at, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Cabling type : Category 5e or better
Antennas : Internal antennas optimized for installation on a wall or ceiling
Operating system : Linux
Ports : 5 – 10/100/1000 Ethernet, with support for 802.3af/at PoE, power port for AC adapter (not included)
Power supply : 802.3af/at PoE and external 48V/1.25A DC power adapter (not included)
Buttons : Reset button
Lock slot : Slot for Kensington lock
LEDs : One multi-function LED

Description

Highlights

Provides cost-effective 802.11ac connectivity with speed up to 1.2 Gbps
Supports 2×2 multiple-input multiple-output (MIMO) technology with two spatial streams for maximum performance on both 2.4- and 5.0-GHz radios
5 Gigabit Ethernet LAN with Energy Efficient Ethernet
Mounts directly to an electrical or data junction box
A captive portal helps enable highly secure guest access with customized roles and rights
Single Point Setup requires no controller for easy, cost-effective deployment of multiple access points
Works right out of the box with easy installation and a simple web-based configuration and wizard

Features

Concurrent dual-band radio support up to 867 Mbps on a 5.0-Ghz radio and 300 Mbps on a 2.4-Ghz radio to increase capacity and coverage
2×2 MIMO with two spatial streams on both 5.0 GHz and 2.4 GHz allows for maximum performance
Single Point Setup, a controller-less technology, simplifies the deployment and management of multiple access points, without requiring additional hardware
A 5-port Gigabit Ethernet LAN switch supports both PoE powered device (PD) and powered sourcing equipment (PSE) so that IP devices can be powered and the access point can be powered by the backbone switch
Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, help protect sensitive business information
Captive portal support facilitates highly secure, customized guest access with multiple rights and roles
Simple installation and an intuitive web-based configuration and wizard facilitate fast, simple deployment and setup in minutes
Support for PoE allows for easy installation without expensive additional wiring
A sleek design with multiple internal antennas and a versatile mounting kit allows for mounts directly to an electrical or data junction box
Intelligent quality of service (QoS) prioritizes network traffic to help keep critical network applications running at top performance
Power-saving sleep mode and port control features help to increase energy efficiency
Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network
Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades
A limited lifetime hardware warranty provides peace of mind two spatial streams on both 5.0 GHz and 2.4 GHz

Specifications

Standards: IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af/at, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Cabling type: Category 5e or better
Antennas: Internal antennas optimized for installation on a wall or ceiling
Operating system: Linux
Physical Interfaces: Ports
5 – 10/100/1000 Ethernet, with support for 802.3af/at PoE, power port for AC adapter (not included)
Power supply: 802.3af/at PoE and external 48V/1.25A DC power adapter (not included)
Buttons: Reset button
Lock slot: Slot for Kensington lock
LEDs: One multi-function LED

Physical Specifications

Physical dimensions (W x D x H): 6.5 x 4.33 x 1.8 in. (165 x 110 x 45.75 mm)
Weight: 1.06 lbs or 480 g

Reviews

There are no reviews yet.

Be the first to review “Cisco WAP361 Wireless-AC/N Dual Radio Wall Plate Access Point with PoE (Russia)”

Shop